what name of color white to paint kitchen cabinets using argento romano countertops

Hi friends! We fabricated some good progress on our kitchen remodel this weekend and I'm excited to show you the changes!

When information technology came fourth dimension to choose new countertops, we headed to Home Depot to cost things out. I knew stone would be expensive, simply holy crap. Stone is EXPENSIVE!!

So we ruled that out pretty chop-chop. I don't think our home value can back up $5000 worth of countertops, I don't intendance almost having granite that much, and I knew nosotros could come up with something else that would all the same exist pretty.

Next we looked at laminate countertops. If we had ordered laminate countertops from Home Depot, information technology still would have been about $1800. Ouch!

So I got on the internet and researched the heck out of things. I beloved the look of physical countertops, but hubby vetoed them. Said they were as well likely to stain, too rustic and besides trendy. I complained a little before moving on.

Then I came beyond THIS mail by the amazing Anna White and knew that information technology was the solution we were looking for. We could build our ain laminate countertops!

Laminate has come a long mode, friends. It is really pretty nowadays and comes in so many styles. I was amazed at the samples. I considered the Formica Argento Romano:

I loved the soft look and the mix of grayness and white. Isn't Chelsea's kitchen so pretty?

I considered the Formica 180fx Calacatta Marble:

The wait of marble without the maintenance? Sign me upwards!

But my hubby wanted more contrast. We are painting our cabinets white and I desire a white backsplash, and then light countertops would have fabricated the whole kitchen white. Which I would love, just the hubster non so much. And I did similar the thought of dissimilarity, so we narrowed our choices to a black countertop.

We chose Formica Basalt Slate Scovato Finish. It'due south black, but non solid black. It has a lot of natural motility, but zippo splotchy or too busy.

So we went back to Habitation Depot and special ordered one 4'x12′ and one 4'x8′ laminate sheet. In that location are places online that you can purchase laminate sheets, but aircraft costs add upwardly and special ordering from Home Depot ended up existence the cheapest. We paid $200 full for both sheets, plus another $200 or so for the MDF and other supplies to build the actual countertop forms.

If you are thinking virtually doing your own laminate countertops, here's a run-downwards of the procedure:

one. Build MDF Countertop Bases. We glued and screwed (from the bottom side) two pieces of 3/iv inch MDF together to get the right thickness for the countertops, then cutting them to the shape of our counters and sanded the edges shine. The countertops have to be pulled abroad from the wall when y'all place the laminate on, so just keep that in heed.

ii. Crude Cut Laminate. Cut strips of laminate to cover the edges of the countertop, then cut a large piece to become on top. Get out at least two inches of overhang on all sides of the projects. Trust me on this one… y'all want to start big and trim it off afterwards. We used our circular saw to cutting through the laminate.

3. Gum Counter Sides. Encompass the backs of the long strips of laminate pieces and the countertop sides with an even layer of contact cement. We found the easiest way was to utilise the cement using cheap foam rollers from Harbor Freight. Permit mucilage dry out for 30 minutes (cheque the instructions on the can since some brands may take different dry times).

In that location is some other fashion to exercise the edges of a laminate countertop that I just recently found out nigh. They sell special pre-made edges that you tin glue onto your countertops. If you desire a fancy ogee, bevel or bullnose edge, this is something you might want to look into. I think it'due south a great idea and it actually looks easy to practice. HERE and Hither are two different videos showing how this type of edge is applied and HERE is a identify that sells the edges for a lot of different types of laminate, including Formica's Basalt Slate, which is the laminate we used. It runs virtually $thirty for an 8 foot piece, and so information technology would add a bit of expense to your countertops, but probably not more $100 or so, which I think is still really reasonable.

4. Adhere Sides. Before we go any further, you need to know this critical information: Contact cement seems like no big deal when y'all impact it with your fingers BUT one time contact cement touches itself, information technology is glued forever. FOR-EV-ER,do you hear what I'm telling y'all?!? So you need to be reeeeeaaaaalllly careful as you get-go pressing the laminate strips to the edges of the counter. If you get off somehow, you can't pull information technology back off to fix it. That's why you leave and so much overhang. Information technology's your safety net. Start on one finish and gradually smooth the slice downwards the entire length of the countertop side.

We have an angled corner chiffonier, so nosotros had to curve the laminate strips. Nosotros did this using a heat gun before any mucilage was involved. If you accept whatsoever curves or rounded edges, hither are some resources you might want to check out:Heating Laminate to Bend
Curving Around an Outside Radius

5. Route Around The Edges. Using a laminate flake, run your router around the edges of the countertops to trim off the extra laminate. You may demand to exercise several passes to get the edges affluent with the wood. I also propose doing a test run on scrap cloth and so you don't mess upwards on your actual countertops.

6. Glue Counter Tops. After all of the edges of your countertops are covered in laminate and routed flush with the wood, information technology's time to put gum on the top surface. Coil contact cement on both the back of the laminate and the countertop. Allow dry xxx minutes.

7. Cover Countertop with Dowels. This step is crucial. Remember how I warned you that you have exactly i chance with contact cement? Place dowels ever 3-five inches across the entire surface of your countertop. The dowels won't stick to the contact cement and will prevent the laminate from sticking to the MDF until yous desire it to.

8. Bond Laminate to Wood. Place the laminate canvass on top of the dowels. Brand sure everything is lined upwardly correctly with the wood. Advisedly begin pressing the laminate to the woods, leaving enough of laminate overhanging on all sides. Start in the middle and work to one side, and so do the other side. Remove the dowels as y'all get.


nine. Route Around The Edges. Trim off the extra laminate with your router bit, only like you did on the countertop sides before.

10. File Edges. The edges of your freshly cut laminate volition exist abrupt, so file them down with a metal file at a 45 degree bending.

Check out our new countertops! I am and then pleased I could squeeeeeeaaaaaallllll!!

They sure do brand the cabinets look atrocious, don't you think? Haha.I don't profess to be an expert at laminate countertop installation. Hither are the resources I plant most helpful. If you lot are serious most DIY-ing your laminate countertops, I'd read through all of the links earlier you lot get started.

Ana White'due south Photo Tutorial

My Favorite YouTube Tutorial

See Jane Drill YouTube Tutorial

Here'due south some insider information, the down-depression if you will, on what it was like installing our own laminate countertops:

– We love the finished countertops. I would choose the aforementioned colour and style of laminate again in a heartbeat. It does not await cheap at all! It cleans upward beautifully, has natural movement and doesn't show smudges or wipe marks. I think information technology looks a lot similar honed marble or slate.

– This project was definitely one of the harder and more stressful DIY'due south we take attempted. At that place'due south a learning curve using the router and we take a few places where we chewed through the colored layer of laminate or accidentally knicked it. Naught a black marker couldn't fix, but I want to give you all the info… the skilful, the bad, ALL of it.

– We messed up. Yes. Royally . One fateful Saturday some time well past midnight, after working on the kitchen for 12+ hours and non being completely right in the head, we laid the laminate downwardly crooked on the main section of our countertop. Remember how I said y'all get one adventure with contact cement? I know from experience, considering we ruined a slice of laminate and had to special order a new ane, which left u.s. without a kitchen sink for a week, cost us an additional $70 and left us scraping off dried upward contact cement for hours so that we could prep the MDF for the second try.

– I love the cost. The full was $470 for new countertops (that includes the extra slice of laminate we had to purchase later making our big mistake). Even with the mistake, I'll have it! And let me just remind you lot that nosotros have a lot of countertop in our kitchen. The main section is 12'8″ long plus we have a three'x5′ island also. Our DIY laminate countertops cost 90% less than granite!

– I only nigh threw a hissy fit when I realized that we would take to take a seam in our countertop. I idea my life was ruined. I thought you would walk into the kitchen and say, "Overnice kitchen. Except for that seam. It's glaring at me like a neon sign." Laminate sheets simply come in 12 foot lengths and our longest stretch of countertop is 12'eight″. I was ready to chop viii″ off my base cabinets. Luckily I have a rational married man who assured me it would exist fine. And guess what? It'due south fine. It's inappreciably noticeable, actually. No neon sign! Plus, nosotros placed the seam under the spot where I go along my dish drying mat. So I never even observe information technology. Do you see information technology in the picture below? Very not-neon sign-ish, wouldn't y'all agree?

– I actually wanted those fancy edges that they make for laminate now, only that's non something you can DIY. I was really worried that I would take those ugly brownish lines around my edges and and then every time I'd walk into the kitchen those brown lines would exist similar petty neon signs too. Guess what? No neon sign once more!The just thing that bothered me near my edges was that you could run into a bit of the white center layer of the laminate. So I got out my permanent marking and fixed it and now my edges look bang-up.

So here'due south the summary…

one. I'grand happy with the finished product. It's pretty, inexpensive and easy to clean.

2. It was a hard DIY because of the huge 12'8″ section nosotros have in our kitchen. Smaller would have been much easier. Our island was a breeze.

three. I would absolutely practise it again.

Did yous happen to see my new undermount sink in some of the pictures? Oh, baby. I love this affair! Did you lot know you tin install an undermount sink in laminate countertops? Isn't that the most amazing thing you've ever heard!? Information technology'southward a Karran sink made for laminate countertops. Read all the gory details near the sink installation Hither.

Are you thinking near DIY-ing your laminate kitchen countertops? I'd be happy to respond any questions you accept!

Here'due south where nosotros started in this kitchen remodel:

And here'due south where we are today:

Click hither to encounter the finished kitchen remodel!

I was Not compensated for this mail. We researched the available options and chose what we idea was best. I always requite you my honest opinion, whether I'g working with a company or not.

labatmakeden1950.blogspot.com

Source: https://www.thecraftpatchblog.com/how-to-diy-laminate-countertops/

Share this post